SGS standard carbide end mill
HRC ≤ 45 degree
Raw material: Solid carbide
Micro grain: 0.4-0.6 um
Cobalt: 10%
Coating: ALTIN
Helix angle: 35 degree
It mainly used for machining cast iron, copper and other ordinary material.
Welcome to contact us at any time
HRC ≤ 45 degree
Raw material: Solid carbide
Micro grain: 0.4-0.6 um
Cobalt: 10%
Coating: ALTIN
Helix angle: 35 degree
It mainly used for machining cast iron, copper and other ordinary material.
Welcome to contact us at any time
| Outside diameter(D) | Shank diameter(D) | Fluted length(L) | Overall Length(L) |
| 1.0 | 4 | 3 | 50 |
| 1.5 | 4 | 4 | 50 |
| 2.0 | 4 | 5 | 50 |
| 2.5 | 4 | 6 | 50 |
| 3.0 | 4 | 8 | 50 |
| 3.5 | 4 | 10 | 50 |
| 4.0 | 4 | 11 | 50 |
| 1.0 | 6 | 3 | 50 |
| 1.5 | 6 | 4 | 50 |
| 2.0 | 6 | 5 | 50 |
| 2.5 | 6 | 6 | 50 |
| 3.0 | 6 | 8 | 50 |
| 3.5 | 6 | 10 | 50 |
| 4.0 | 6 | 11 | 50 |
| 5.0 | 6 | 13 | 50 |
| 6.0 | 6 | 15 | 50 |
| 7.0 | 8 | 17 | 60 |
| 8.0 | 8 | 20 | 60 |
| 10.0 | 10 | 25 | 75 |
| 12.0 | 12 | 30 | 75 |
| 14.0 | 14 | 35 | 100 |
| 16.0 | 16 | 40 | 100 |
| 18.0 | 18 | 40 | 100 |
| 20.0 | 20 | 40 | 100 |