Machine Type: Auto Release, for Caps
Platen Size: 102*203mm
Under Plate: Changeable
Base Plate Size: 70*165mm,76*146mm
102*165mm & 102*203mm
Controller: GY-04 Digital Time & Temp. Control
Gas Spring Control: Yes
Voltage: 120V/ 220V
Power: 500-1000W
Time Range: 0-999 sec.
Maximum Temp: 225 C
Temperature Accuracy: ±0.5%
Packing Size: 70*66*35cm
Gross Weight: 25kg
Printing methods
Step 1: Make sure the cord is connected well to the wall socket. Place the object (i.e. T-shirt) on press bed, and transfer paper with images facing down the object, adjust pressure to your requirement, and turn on the power.
Step 2: Set the temperature and time required, then temperature starts to rise.
Step 3: When the temperature rises to the setting temperature, the buzzer sends out sounds; then close down heat platen (meantime the sounds stop) and starts to transfer.
Step 4: Then the time counter is on, once time is up, the upper heat platen will auto open and swing away to
another side automatically.
Step5: Consult the Transfer Paper instructions on whether to peel cold or hot, Here are suggested Pressing time
guidelines for different transfer paper.
Ink-Jet Transfer Paper (fabric) 14-18 seconds
Laser Copier/Printer Transfer Paper (fabric) 18-25 seconds
Sublimation Transfers (onto Fabrics) 25-30 seconds
Sublimation Transfers (onto FR-Plastic/Woods) 60-70 seconds