The STE-317-X3XM is a 10/100mbps fiber plus copper switches that comes with websmart & SNMP management features...Offering 1 10/100mbps fiber port, together with 7 10/100bps copper port, the STE-317-X3XM optic switch easily extends your network up to 80Km. It could be a good option for your FTTH
, FTTO, FTTD solutions.
The STE-317-X3XM supports web & snmp management that enables easy access and manage the switch.
Support Telnet, Users can manage the switch remotely. When the network load is too heavy, users can adjust the network flow by IEEE 802.3X packages.
>>> Offering IEEE 802.1P priority, the STE-317-X3XM provides 3 modes of priority.
First-in-first Service: The switch will transmit earlier received data package first.
All-High-Before-Low: The switch will transmit high priority data package first.
Weight-Round-Robin: The switch will transmit data package according to the queue weight, transmit high priority data package and low priority data alternately. The data package that are for low priority will not be
Delay or rejected in this way.
>>> Providing Class of Service ( COS ):
With class service configuration and priority control, the STE-317-X3XM implements Qos function. It supports data pakages' high and low priority, three modes of priority mode. If some port's Port Base is chosen, and high priority is enabled, all data package gets into this port will be mapping as high priority.
If VLAN Tag is chosen, the switch will unscramble 3- digit priority mark in Vlan-Tag data package automatically, if that mark is high priority, it will be mapping as high priority. If IP TOS/DS is chosen, the switch will unscramble 8- digit mark in IPV6/IPV4 data package automatically, if this mark is high priority, it will be mapping as high priority.
>>> VLAN Multi to One
This function regards ports as target VLAN, other ports can add into this target VLAN port as a VLAN group.
But after this function is active, the original setup of the VLAN group may be replaced or cleared.
>>> Broadcast Storm Control
Broadcast Storm Max Value refers to the Broadcast Storm Limited Value, for example, if Broadcast storm
Packets received at 100Mbps in 10ms reach 127 (or the pre-set Max Value), switch will detect that Broadcast Storm is happening. And it will start the Broadcast Storm Control function and give up the unnecessary
Broadcast storm packets.
>>> Port Mirroring:
To monitor more than one port at the same time, supports port monitoring receiving, port monitoring sending and port monitoring of receiving and sending modes, supports monitoring across different VLANs
>>> Port Bandwidth Control:
Port bandwidth control enables you to control the transmission rate of each port, including upstream and downstream, and stop the user of a certain port from using too much bandwidth. And user of other ports will have more stable bandwidth. This function can be used in net cafe or broadband connection to smart residential area.
, FTTO, FTTD solutions.
The STE-317-X3XM supports web & snmp management that enables easy access and manage the switch.
Support Telnet, Users can manage the switch remotely. When the network load is too heavy, users can adjust the network flow by IEEE 802.3X packages.
>>> Offering IEEE 802.1P priority, the STE-317-X3XM provides 3 modes of priority.
First-in-first Service: The switch will transmit earlier received data package first.
All-High-Before-Low: The switch will transmit high priority data package first.
Weight-Round-Robin: The switch will transmit data package according to the queue weight, transmit high priority data package and low priority data alternately. The data package that are for low priority will not be
Delay or rejected in this way.
>>> Providing Class of Service ( COS ):
With class service configuration and priority control, the STE-317-X3XM implements Qos function. It supports data pakages' high and low priority, three modes of priority mode. If some port's Port Base is chosen, and high priority is enabled, all data package gets into this port will be mapping as high priority.
If VLAN Tag is chosen, the switch will unscramble 3- digit priority mark in Vlan-Tag data package automatically, if that mark is high priority, it will be mapping as high priority. If IP TOS/DS is chosen, the switch will unscramble 8- digit mark in IPV6/IPV4 data package automatically, if this mark is high priority, it will be mapping as high priority.
>>> VLAN Multi to One
This function regards ports as target VLAN, other ports can add into this target VLAN port as a VLAN group.
But after this function is active, the original setup of the VLAN group may be replaced or cleared.
>>> Broadcast Storm Control
Broadcast Storm Max Value refers to the Broadcast Storm Limited Value, for example, if Broadcast storm
Packets received at 100Mbps in 10ms reach 127 (or the pre-set Max Value), switch will detect that Broadcast Storm is happening. And it will start the Broadcast Storm Control function and give up the unnecessary
Broadcast storm packets.
>>> Port Mirroring:
To monitor more than one port at the same time, supports port monitoring receiving, port monitoring sending and port monitoring of receiving and sending modes, supports monitoring across different VLANs
>>> Port Bandwidth Control:
Port bandwidth control enables you to control the transmission rate of each port, including upstream and downstream, and stop the user of a certain port from using too much bandwidth. And user of other ports will have more stable bandwidth. This function can be used in net cafe or broadband connection to smart residential area.