Double Layer Forming Fabric-- Fine Industrial Belt for Banknote Paper Machine, 2.5 Layer Forming Fabric, Excellent Retention ( High Fiber Support Index), Excellent Dewatering (Very Open), and Excellent Life (High Wear Potential)
Made By Jurgens 13m Wide Weaving Looms and Austria Automatic Seaming Machine
PRODUCT DESCRIPTION
-----------------------------------------------------------------------------------------------------------------------------------
The forming section consists of a long moving belt of fine mesh screen supported by rolls or foils. For many decades, this screen belt was made of bronze and called the "wire." Today it is made of synthetic polymer - primarily polyester monofilament - and is called the forming fabric. Newer machines (gap formers) trap the slurry out of the slice between two forming fabrics. As the forming fabric moves along the forming section, water drainage is assisted by foils. The fiber then passes over the suction boxes to pull more water from the furnish. Still more water is removed at the couch roll just before the sheet leaves the forming section. At this point, the sheet consistency is about 20%.
Dedicated research has produced synthetic forming fabrics that yield improved drainage, higher production and longer life at a lower cost per ton of paper produced.
Keylife's forming fabrics are available in a wide variety of meshes, depending on the type of paper produced. Coarse mesh fabrics are used to manufacture heavy paper grades such as those used in the production of corrugated boxes. Very fine mesh fabrics are required for lightweight paper, such as writing paper, book paper and magazine paper. The average life span of a forming fabric, depending on the type of paper, is approximately three months.
Keylife double layer forming fabric is an established double layer forming fabric family with qualities for all paper grades. It is available in 8 and 16 shaft designs with or without extra support strands on the paper side. The excellent raw material, which has the dimensional stability and abrasion resistance, is used to promote increased life potential and reduced energy consumption.
TWO AND A HALF LAYER FORMING FABRICS FOR PAPAER MACHINE CLOTHING
Stable 2,5 -layer fabrics
Suitable for all paper and board machines
Good fiber support -high dry content after forming section
Low energy consumption
An Option for Good Forming Capability at Reasonable Cost
Good Application in Paper Making
COMPANY INTRODUCTION
------------------------------------------------------------------------------------------------------------------------------------
KEYLIFE is a professional manufacturer of industrial fabrics in China. The plant ranks one of top 5 in the industry in the country, with a registered capital of USD 7.3 Million and an anual sale over USD 10 Million.
| Weaving Structure | Style | Yarn Diameter mm | Density ( /cm) | Strength (N/cm) | Thick- ness mm | Perm eability m3/m2h | Max. Elongation at 50N/cm | |||
| Warp | Weft | Warp | Weft | Fabric | Seam | |||||
| 16-Shed 2.5 Layer Forming Screen | 603516-1 | 0.17 | 0.13,0.20/0.35 | 68 | 49 | >=960 | >=700 | 1.00 | 6500 | 0.45% |
| 603516-2 | 0.17 | 0.13,0.20/0.35 | 68 | 54 | >=900 | >=700 | 1.00 | 5000 | 0.45% | |